Documentation map / User manual (board)

UMUM2695· 12 pages

UM2695 STMod+ fan-out expansion board user manual

The STMod+ fan-out board (MB1280): Grove, mikroBUS, Pmod-style headers and how they map to STMod+.

What a user manual (board) is for

The Discovery kit and STMod+ board as hardware you hold in your hand. Describes the boards rather than the chip: how to power them, the ST-LINK/V3E debugger and virtual COM port, jumper and solder-bridge settings, every connector pinout (Arduino, STMod+, audio, Ethernet), and which on-board device sits on which MCU signals. The STMod+ fan-out manual explains how the STMod+ connector breaks out to Grove, mikroBUS and other headers.

Use it when
  • Which UART is the ST-LINK virtual COM port?
  • What does solder bridge SBxx change? Which jumper selects the power source?
  • Arduino connector pinout and which MCU pin each header pin maps to.
  • How the LCD, SDRAM, QSPI flash and audio codec are connected.
Not for

Exact wiring details (series resistors, pull-ups, which net goes where): use the schematic.

Contents 15