Documentation map / User manual (board)
UMUM2488· 39 pages
UM2488 STM32H745I/H750B-DK Discovery kit user manual
The Discovery board: power options, jumpers, solder bridges, connectors, ST-LINK, on-board devices.
What a user manual (board) is for
The Discovery kit and STMod+ board as hardware you hold in your hand. Describes the boards rather than the chip: how to power them, the ST-LINK/V3E debugger and virtual COM port, jumper and solder-bridge settings, every connector pinout (Arduino, STMod+, audio, Ethernet), and which on-board device sits on which MCU signals. The STMod+ fan-out manual explains how the STMod+ connector breaks out to Grove, mikroBUS and other headers.
Use it when
- Which UART is the ST-LINK virtual COM port?
- What does solder bridge SBxx change? Which jumper selects the power source?
- Arduino connector pinout and which MCU pin each header pin maps to.
- How the LCD, SDRAM, QSPI flash and audio codec are connected.
Not for
Exact wiring details (series resistors, pull-ups, which net goes where): use the schematic.
6 Hardware layout and configurationp.716
6.1 STM32H745I-DISCO and STM32H750B-DK layoutp.86.2 STM32H745I-DISCO and STM32H750B-DK mechanical drawingp.106.3 Embedded STLINK-V3Ep.106.4 Power supplyp.116.5 Clock sourcesp.136.6 Reset sourcesp.146.7 Audiop.146.8 USB OTG_FSp.146.9 eMMCp.146.10 Ethernetp.146.11 Power over Ethernetp.156.12 SDRAMp.156.13 Quad-SPI NOR Flash memoryp.156.14 Virtual COM portp.156.15 RGB LCD displayp.156.16 Buttons and LEDsp.16
7 Connectorsp.1712
7.1 ARDUINO(R) Uno V3 connectorsp.177.2 CN13 USB OTG_FS Micro-AB connectorp.187.3 CN1 Ethernet RJ45 connectorp.187.4 LCD RGB connectorp.197.5 CN2 STMod+ connectorp.207.6 CN14 STLINK-V3 USB Micro-B connectorp.207.7 Audio stereo speaker header connectors (CN17 and CN18)p.207.8 CN9 audio line output (green jack) connectorp.207.9 CN8 audio line input (blue jack) connectorp.217.10 CN16 TAG connectorp.217.11 CN4 STDC14 connectorp.217.12 CN15 USB power connectorp.22
Nothing matches.