Documentation map / User manual (board)
UMUM2695· 12 pages
UM2695 STMod+ fan-out expansion board user manual
The STMod+ fan-out board (MB1280): Grove, mikroBUS, Pmod-style headers and how they map to STMod+.
What a user manual (board) is for
The Discovery kit and STMod+ board as hardware you hold in your hand. Describes the boards rather than the chip: how to power them, the ST-LINK/V3E debugger and virtual COM port, jumper and solder-bridge settings, every connector pinout (Arduino, STMod+, audio, Ethernet), and which on-board device sits on which MCU signals. The STMod+ fan-out manual explains how the STMod+ connector breaks out to Grove, mikroBUS and other headers.
Use it when
- Which UART is the ST-LINK virtual COM port?
- What does solder bridge SBxx change? Which jumper selects the power source?
- Arduino connector pinout and which MCU pin each header pin maps to.
- How the LCD, SDRAM, QSPI flash and audio codec are connected.
Not for
Exact wiring details (series resistors, pull-ups, which net goes where): use the schematic.
2 Connectorsp.48
2.1 STMod+ male connector CN1p.42.2 Compatible connectors for the Grove boardsp.42.2.1 Compatible connector for UART Grove boards CN2p.42.2.2 Compatible connector for I2C Grove boards CN3p.52.3 ESP‑01 Wi‑Fi(R) board compatible connector CN4p.52.4 Breadboard connectors CN9 and CN12p.62.5 mikroBUS(TM) compatible connectors CN10 and CN11p.62.6 Power selection jumper JP1p.7
Nothing matches.